| i. MPP. Metallized polypropylene film capacitor - radial dipped |
| ii. MPB. Metallized polypropylene film capacitor - encapsulated |
| iii. MPT & MPF. Metallized polypropylene film capacitor - axial lead |
| iv. MPS. Metallized polypropylene film capacitor D.C. and pulse applications - radial dipped |
| v. MSB. Metallized polypropylene film capacitor D.C. and pulse applications - encapsulated |
iii. MPT & MPF. Metallized Polypropylene Film Capacitor - Axial Lead
MPF & MPT are constructed with metallized polypropylene film dielectric, copperply , outer wrap by polyester film tape and ends sealed by epoxy resin in non-inductive type. They are ideal for use in communication equipments, timing circuit, integrating and filter networks.
Drawing:
Outline Drawing |
Construction |
Appearance |
![]() |
![]() |
![]() |
Features:
Specification:
Performance:
| Test Characteristics | Test Methods JIS C 5102 | Performance |
| Withstand voltage: Between terminals | Apply 1.5 times of rated voltage for 60 sec. Charge discharge current must be 1A max | Shall be no abnormality |
| Withstand voltage: Between terminals & enclosure | Apply 2.0 times of rated voltage for 1 to 5 sec | Shall be no abnormality |
| Insulation resistance: Between terminals | Apply rated voltage ±15% for 60 sec. when rated voltage under 100V. Apply 100V ±15% when rated voltage from 100V to 500V at 20℃ | ≤0.33µF 30,000MΩ (2E 2G 2J) >9000 MΩ (2A) |
| Insulation resistance: Between terminals & enclosure | >0.33µF 10,000MΩ•µF (2E 2G 2J) >3000 MΩ•µF (2A) |
|
| Heat proof: Insulation resistance at 85℃ | Testing temperature: 85±2℃ | ≤0.33µF≧900MΩ at 85℃ >0.33µF≧300MΩ•µF at 85℃ |
| Heat proof: Rate of variation of capacitance at 85℃ | Within +5% -2% of the value before test | |
| Humidity test: Appearance | Temperature: 40±2 ; Humidity: 90-95% RH Testing time: 500 +24 -0 Hrs. Apply voltage: rated voltage. After testing, leave it for about 16 Hrs. at standard condition Withstand voltage is 130% rated voltage, 60 sec. |
Shall be no abnormality |
| Humidity test: Withstand voltage | Shall be no abnormality | |
| Humidity test: Insulation resistance | ≤0.33µF≧2700MΩ >0.33µF≧900MΩ•µF |
|
| Humidity test: Dissipation factor | 0.011 (1.1%) Max. | |
| Humidity test: Rate of variation capacitance | Within ±10% of the value before test | |
| Reference Standard | GB 10190 (IEC 60384-16) / JIS C 5102 | |
Dimensions:
-> MPT
200/250VDC |
|||||
| Part No. | Cap. (µF) |
Dimensions(mm) |
dv/dt V/μs |
||
OD |
L |
dФ |
|||
| MPT103□2E-5A5□□□□□ | 0.010 |
5.0 |
15.0 |
0.6 |
10.0 |
| MPT153□2E-5A5□□□□□ | 0.015 |
5.0 |
15.0 |
0.6 |
10.0 |
| MPT223□2E-6A5□□□□□ | 0.022 |
6.0 |
15.0 |
0.6 |
10.0 |
| MPT333□2E-6A5□□□□□ | 0.033 |
6.0 |
15.0 |
0.6 |
10.0 |
| MPT473□2E-6A5□□□□□ | 0.047 |
6.5 |
15.0 |
0.6 |
10.0 |
| MPT683□2E-7A5□□□□□ | 0.068 |
7.5 |
15.0 |
0.6 |
10.0 |
| MPT104□2E-8A5□□□□□ | 0.10 |
8.0 |
15.0 |
0.6 |
10.0 |
| MPT154□2E-8B1□□□□□ | 0.15 |
8.0 |
21.0 |
0.8 |
7.0 |
| MPT224□2E-9B1□□□□□ | 0.22 |
9.0 |
21.0 |
0.8 |
7.0 |
| MPT334□2EA0B1□□□□□ | 0.33 |
10.5 |
21.0 |
0.8 |
7.0 |
| MPT474□2EA0B7□□□□□ | 0.47 |
10.5 |
27.0 |
0.8 |
4.0 |
| MPT384□2EA2B1□□□□□ | 0.68 |
12.5 |
27.0 |
0.8 |
4.0 |
| MPT105□2EA4C3□□□□□ | 1.0 |
14.0 |
33.0 |
0.8 |
2.5 |
| MPT155□2EA6C3□□□□□ | 1.5 |
16.0 |
33.0 |
0.8 |
2.5 |
| MPT225□2EA8C3□□□□□ | 2.2 |
18.0 |
33.0 |
0.8 |
2.5 |
| MPT335□2EB0C7□□□□□ | 3.3 |
20.0 |
37.0 |
0.8 |
2.5 |
| MPT475□2EB2C7□□□□□ | 4.7 |
22.0 |
37.0 |
0.8 |
2.5 |
400VDC |
|||||
| Part No. | Cap. (µF) |
Dimensions(mm) |
dv/dt V/μs |
||
OD |
L |
dФ |
|||
| MPT103□2G-5A5□□□□□ | 0.010 |
5.5 |
15.0 |
0.6 |
13.5 |
| MPT153□2G-6A5□□□□□ | 0.015 |
6.0 |
15.0 |
0.6 |
13.5 |
| MPT223□2G-7A5□□□□□ | 0.022 |
7.0 |
15.0 |
0.6 |
13.5 |
| MPT333□2G-7A5□□□□□ | 0.033 |
7.5 |
15.0 |
0.6 |
13.5 |
| MPT473□2G-8B1□□□□□ | 0.047 |
8.0 |
21.0 |
0.8 |
10.0 |
| MPT683□2G-8B1□□□□□ | 0.068 |
8.0 |
21.0 |
0.8 |
10.0 |
| MPT104□2G-8B1□□□□□ | 0.10 |
8.5 |
21.0 |
0.8 |
10.0 |
| MPT154□2GA0B1□□□□□ | 0.15 |
10.0 |
21.0 |
0.8 |
10.0 |
| MPT224□2G-9B7□□□□□ | 0.22 |
9.5 |
27.0 |
0.8 |
6.5 |
| MPT334□2GA2B7□□□□□ | 0.33 |
12.0 |
27.0 |
0.8 |
6.5 |
| MPT474□2GA3C3□□□□□ | 0.47 |
13.0 |
33.0 |
0.8 |
4.0 |
| MPT684□2GA5C3□□□□□ | 0.68 |
15.0 |
33.0 |
0.8 |
4.0 |
| MPT105□2GA8C4□□□□□ | 1.0 |
18.0 |
34.0 |
0.8 |
4.0 |
| MPT155□2GB0C7□□□□□ | 1.5 |
20.0 |
37.0 |
0.8 |
4.0 |
| MPT225□2GB2C7□□□□□ | 2.2 |
22.0 |
37.0 |
0.8 |
4.0 |
| MPT335□2GB4D2□□□□□ | 3.3 |
24.0 |
42.0 |
0.8 |
4.0 |
| MPT475□2GB6D7□□□□□ | 4.7 |
26.0 |
47.0 |
0.8 |
4.0 |
630VDC |
|||||
| Part No. | Cap. (µF) |
Dimensions(mm) |
dv/dt V/μs |
||
OD |
L |
dФ |
|||
| MPT103□2J-6A5□□□□□ | 0.010 |
6.5 |
15.0 |
0.6 |
20 |
| MPT153□2J-7A5□□□□□ | 0.015 |
7.0 |
15.0 |
0.6 |
20 |
| MPT223□2J-8A5□□□□□ | 0.022 |
8.0 |
15.0 |
0.6 |
20 |
| MPT333□2J-8B1□□□□□ | 0.033 |
8.0 |
21.0 |
0.8 |
15 |
| MPT473□2J-9B1□□□□□ | 0.047 |
9.0 |
21.0 |
0.8 |
15 |
| MPT683□2JA0B1□□□□□ | 0.068 |
10.5 |
21.0 |
0.8 |
15 |
| MPT104□2JA1B7□□□□□ | 0.10 |
11.0 |
27.0 |
0.8 |
10 |
| MPT154□2JA2B7□□□□□ | 0.15 |
12.0 |
27.0 |
0.8 |
10 |
| MPT224□2JA4C3□□□□□ | 0.22 |
14.0 |
33.0 |
0.8 |
6 |
| MPT334□2JA6C3□□□□□ | 0.33 |
16.0 |
33.0 |
0.8 |
6 |
| MPT474□2JA8C3□□□□□ | 0.47 |
18.0 |
33.0 |
0.8 |
6 |
| MPT684□2JB0C7□□□□□ | 0.68 |
20.0 |
37.0 |
0.8 |
6 |
| MPT105□2JB2C7□□□□□ | 1.0 |
22.0 |
37.0 |
0.8 |
6 |
-> MPF
200/250VDC |
||||||
| Part No. | Cap.(µF) |
Dimensions(mm) |
dv/dt V/μs |
|||
W |
L |
T |
dФ |
|||
| MPF104□2EA0A5□□□□□ | 0.10 |
10.0 |
15.0 |
6.0 |
0.6 |
10.0 |
| MPF154□2EA1B1□□□□□ | 0.15 |
11.0 |
21.0 |
6.0 |
0.8 |
7.0 |
| MPF224□2EA1B1□□□□□ | 0.22 |
11.0 |
21.0 |
7.0 |
0.8 |
7.0 |
| MPF334□2EA3B1□□□□□ | 0.33 |
13.0 |
21.0 |
8.0 |
0.8 |
7.0 |
| MPF474□2EA4B7□□□□□ | 0.47 |
14.0 |
27.0 |
8.0 |
0.8 |
4.0 |
| MPF684□2EA6B7□□□□□ | 0.68 |
16.0 |
27.0 |
10.0 |
0.8 |
4.0 |
| MPF105□2EA8C3□□□□□ | 1.0 |
18.0 |
33.0 |
11.0 |
0.8 |
2.5 |
| MPF155□2EB0C3□□□□□ | 1.5 |
20.0 |
33.0 |
12.5 |
0.8 |
2.5 |
| MPF225□2EB2C3□□□□□ | 2.2 |
22.0 |
33.0 |
14.0 |
0.8 |
2.5 |
| MPF335□2EB4C7□□□□□ | 3.3 |
24.0 |
37.0 |
15.0 |
0.8 |
2.5 |
| MPF475□2EB7C7□□□□□ | 4.7 |
27.0 |
37.0 |
17.0 |
0.8 |
2.5 |
400VDC |
||||||
| Part No. | Cap.(µF) |
Dimensions(mm) |
dv/dt V/μs |
|||
W |
L |
T |
dФ |
|||
| MPF104□2GA2B1□□□□□ | 0.10 |
12.0 |
21.0 |
7.0 |
0.8 |
10.0 |
| MPF154□2GA3B1□□□□□ | 0.15 |
13.0 |
21.0 |
7.0 |
0.8 |
10.0 |
| MPF224□2GA4B7□□□□□ | 0.22 |
14.0 |
27.0 |
8.0 |
0.8 |
6.5 |
| MPF334□2GA6B7□□□□□ | 0.33 |
16.0 |
27.0 |
10.0 |
0.8 |
6.5 |
| MPF474□2GB0C3□□□□□ | 0.47 |
20.0 |
33.0 |
12.0 |
0.8 |
4.0 |
| MPF684□2GB2C3□□□□□ | 0.68 |
22.0 |
33.0 |
13.0 |
0.8 |
4.0 |
| MPF105□2GB1C3□□□□□ | 1.0 |
21.0 |
33.0 |
13.5 |
0.8 |
4.0 |
| MPF155□2GB4C7□□□□□ | 1.5 |
24.0 |
37.0 |
16.0 |
0.8 |
4.0 |
| MPF225□2GB5D2□□□□□ | 2.2 |
25.0 |
42.0 |
16.0 |
0.8 |
4.0 |
| MPF335□2GC4D7□□□□□ | 3.3 |
34.0 |
47.0 |
23.0 |
0.8 |
4.0 |
630VDC |
||||||
| Part No. | Cap.(µF) |
Dimensions(mm) |
dv/dt V/μs |
|||
W |
L |
T |
dФ |
|||
| MPF104□2JA3B7□□□□□ | 0.10 |
13.0 |
27.0 |
8.0 |
0.8 |
10 |
| MPF154□2JA5B7□□□□□ | 0.15 |
15.0 |
27.0 |
9.0 |
0.8 |
10 |
| MPF224□2JA9C3□□□□□ | 0.22 |
19.0 |
33.0 |
10.0 |
0.8 |
6 |
| MPF334□2JB0C3□□□□□ | 0.33 |
20.0 |
33.0 |
12.0 |
0.8 |
6 |
| MPF474□2JB2C3□□□□□ | 0.47 |
22.0 |
33.0 |
14.0 |
0.8 |
6 |
| MPF684□2JB4C7□□□□□ | 0.68 |
24.0 |
37.0 |
15.0 |
0.8 |
6 |
| MPF105□2JB5C7□□□□□ | 1.0 |
25.0 |
37.0 |
16.0 |
0.8 |
6 |
| MPF155□2JB9D2□□□□□ | 1.5 |
29.0 |
42.0 |
20.0 |
0.8 |
6 |
| MPF225□2JC4D7□□□□□ | 2.2 |
34.0 |
47.0 |
24.0 |
0.8 |
6 |